KFRP复合材料螺旋铣削工艺制孔质量

文摘凯夫拉纤维增强复合材料(KFRP)在钻削过程中会产生严重的分层、起毛等缺陷,难以满足装配工序的要求。本文将螺旋铣削工艺运用于KFRP复合材料制孔,进行了偏心距、主轴转速和刀具类型的单因素试验,以分层因子、起毛面积和孔径偏差表征KFRP复合材料螺旋铣削的制孔质量,深入研究不同工况下的缺陷抑制机理和制孔质量。结果表明,偏心距、主轴转速和刀具结构对制孔质量均有显著影响,采用波形四刃铣刀在偏心距0.5 mm和主轴转速4 000 r/min工况下的制孔质量最好,分层因子和孔径偏差分别为1.27和1.2%,起毛面积比二刃铣刀下降了13.7%。     

电磁作动器动态特性对隔振性能的影响

对电磁作动器的动态特性及其对主动隔振系统振动传递率的影响进行了分析研究.振动传递率不仅受作动器动态特性的影响,而且还与反馈变量的选取有关,这对振动主动控制系统的反馈设计具有指导意义.     

SAR欺骗干扰工程化设计研究

对SAR雷达的欺骗干扰研究在理论模型方面已经有了大量深入的研究,但对该领域在工程化设计方面的研究报道很少.首先给出了SAR欺骗干扰机的系统组成,然后分析了大数据量卷积模块的分段分相流水处理方法.在此基础上,给出了DRFM模块的硬件实现方案.结合硬件,提出了一种简单有效的闭环等效验证方法,并采集实际数据做了验证试验.试验效果证明了该硬件方案的有效性.最后,分析了SAR欺骗干扰机走向实用化所需的进一步研究的内容和方向.     

Closed-loop dynamic control allocation for aircraft with multiple actuators

A closed-loop control allocation method is proposed for a class of aircraft with multiple actuators. Nonlinear dynamic inversion is used to design the baseline attitude controller and derive the desired moment increment. And a feedback loop for the moment increment produced by the deflections of actuators is added to the angular rate loop, then the error between the desired and actual moment increment is the input of the dynamic control allocation. Subsequently, the stability of the closed-loop dynamic control allocation system is analyzed in detail. Especially, the closedloop system stability is also analyzed in the presence of two types of actuator failures: loss of effectiveness and lock-in-place actuator failures, where a fault detection subsystem to identify the actuator failures is absent. Finally, the proposed method is applied to a canard rotor/wing (CRW) aircraft model in fixed-wing mode, which has multiple actuators for flight control. The nonlinear simulation demonstrates that this method can guarantee the stability and tracking performance whether the actuators are healthy or fail.     

脉冲驱动机构分析与应用

]     

Multi-channel data compression

With the development of space telemetry technology, it has brought forward higher requests for large capacity memory of hard recovered solid-state recorders. Therefore, data compression becomes more important. The compression feasibility and potentiality of telemetry data are examined by analyzing the statistical characteristics of actual telemetry data recovered from the recorder. Aiming at the disadvantages of present data format In data compression for multi-channel telemetry data acquisition systems, we introduce data packet structure and a real-time compression algorithm for low complex hardware design put forward accordingly. The principles and implementation of data package compression are described. Simulation results show that this technology can meet the requirements of multi-channel real-time data compression with high compression ratio and fast compression speed, which possesses great application values.     

振动主动控制及其在超精密加工车床中的应用

论述了振动主动控制的方法及应用．并将其应用于超精密加工车床的振动控制，通过振动主动控制系统与原有三通四点空气弹簧的共同作用，车床振动的振动幅大为下降，加工精度明显提高。     

西飞国际采用CAXA数字化制造解决方案

通过CAXA管理平台的产品结构树的管理,将西飞国际数控中心的所有产品的文档以"产品-零部件-零件"的结构分别挂接在不同的节点下,西飞国际以往的图纸可以通过系统的批量导入功能直接导入到系统中.     

K4169合金整体导向环精铸技术及热处理工艺研究

介绍了K4169合金整体导向环铸件的研制过程与方法。研究获得了整体导向环铸件陶瓷型芯、蜡模和型壳制备、真空熔炼浇注工艺。针对K4169铸造高温合金偏析严重的特点，研究出了一种新的低成本的热处理制度：1150℃／4h，AC＋1095℃／2h，AC＋955℃／1h，AC＋720℃／8h，以56℃／h冷却到620℃／8h，AC。采用该热处理制度处理的K4169合金，力学性能优于采用航标规定的热处理制度处理的。重点分析了K4169合金铸件组织偏析产生的原因，并提出了解决措施。所研制的整体导向环铸件，其冶金质量、化学成分和力学性能满足铸件技术条件的规定。     

Gamma Astrometric Measurement Experiment (GAME) – Implementation and performance

The GAME mission concept is aimed at testing the General Relativity, through precise measurement of the gravitational deflection of light by the Sun, by means of an optimised telescope operating in the visible and launched in orbit on a small class satellite. We describe the proposed mission profile, the preliminary payload design and the expected performance. The targeted precision on the γ parameter of the PPN formulation of General Relativity is in the range 10⁻⁶ to 10⁻⁷. The measurement principle relies on the differential astrometric signature on the stellar positions. The instrument concept is based on a dual field, multiple aperture Fizeau interferometer, observing simultaneously two sky regions close to the solar limb. A beam combiner folds the telescope line of sight on two different directions on the sky, separated by a base angle of 4°. The diluted optics approach achieves an efficient rejection of the scattered solar radiation, while retaining an acceptable angular resolution on the science targets.